Polaroid P4000 manual Site requirements, Electrical requirements

Page 25

Site requirements

Operating environment

•Relative humidity: 20% to 80% non-condensing

•Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

•The external power supply is rated at 100-240 VAC, 50-60 Hz, 1.8 amp. (It adjusts to any power within this range.)

•Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 11.5 pounds (5.3 kg). The weight depends on the supplies and options installed.

• The 100-card input hopper is 9.5 inches (241 mm) high and the 200-card hopper is 11.9 inches (302 mm) high.

• The clearances required are 1 inch (25 mm) at the back, 2 inches (51 mm) on the left side, and 10.5 inches (267 mm) above the printer latch to open the cover.

Do not use the printer in a dirty environment. Do not use the printer in a closed compartment. Do not block air flow around the printer.