Installing PDC software on your PowerMac/PowerPC
To view PDC-3000 pictures stored in the camera, optimize and transfer pictures from the camera to your computer, operate the camera through the computer, or change camera setup options, you must use one of the following programs on your PowerMac or PowerPC. Both are provided with the PDC-3000 camera and are installed during the procedure described below.
·PDC Plug-in software Using the Plug-in after it is installed requires an image-processing application (not provided) compatible with Adobe Photoshop plug-in modules.
·PDC Direct software If you do not have an image- processing application compatible with Photoshop plug-in modules, you can use PDC Direct to transfer pictures from the PDC-3000 to your computer.
To install the PDC software on your PowerMac or PowerPC:
1Insert the PDC for PowerMac/PowerPC disk or CD-ROM into an internal or external drive.
2If the disk contents are not already visible, open the disk.
