32
You can change the default settings of this unit to customize its performance to your own
preference. Read this section to learn how to set up the system.
Note: the system should only be set up in the state that no disc (the disc tray should be
closed) is in the DVD drive or the unit is in the completely stop mode.
Follow the steps below to set up your system:
1. Press the SETUP button.
The setup menu will appear on the screen. It includes language setup and preferences.
You can exit from the setup menu by pressing the SETUP button again at any time
during the setting.
2. Press the or to select a sub-menu that you want to set up.
3. Press the or to select the item that you want to set up in the sub-menu.
Press the SETUP button, then the screen will
display as the left.
Press SETUP button, then the screen will display
as the left.
System Setup
1. OSD LANG
This item is used to set the OSD (on-screen
display) language.
Press thebutton to enter the setup of this item.
There are eight languages for you to choose.
Press the or button to choose the proper
one.
Press the ENTER/ENT button to confirm your
selection.
Press the button to exit from this item.