System Setup
GENERAL SET-UP
You can change the default settings to customize performance to your own preference.
1.Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup.
2. Press | (direction buttons) on the remote control to select a category. |
3.All the items in the category will appear on the TV screen. Press the ‘ENTER’ button to confirm your selection.
Category
1. | When you enter a category all the items under this category will | appear, and | |
the items | placed in the middle (or highlighted) will be the current | set up. | |
2. | Press | (right direction button on the remote control to select the correct category. | |
3.Press the direction button to select your preference. The item you select will be highlighted.
4.Press the ‘ENTER’ button to confirm.
5. Press | (left direction button) to enter the other setup menu. |
General Setup
The general setup is shown as follows:
1.TV Display
Select NORAML/PS when a 4:3 TV is connected.
Select Normal/PS, when playing a wide screen picture, the left and right edges will be cut off. Select Normal/LB, display images will have markings bars above and below the picture.
2.Angle Mark
If the scene was recorded from multiple angles, then you can easily change the camera angle of the scene you are watching.
With the ON/OFF switch set to ON you will be notified if alternative viewing angles are available.
- 19 -
