Polaroid PDV-0800 operation manual Troubleshooting, Symptom What To Check

Models: PDV-0800

1 30
Download 30 pages 34.42 Kb
Page 27
Image 27

Troubleshooting

 

Symptom

 

What To Check

 

 

 

 

 

• Make sure the AV IN/OUT switch on the side of the

 

 

 

 

 

player unit is in the OUT position for standard play.

 

 

 

 

Make sure the disc cover is closed.

 

 

 

 

Make sure a disc is loaded.

 

 

 

 

 

• Make sure the disc isn’t loaded upside down.

The player cannot play.

Disc should be clean, not dirty or

warped.

 

 

 

 

• Player’s region code should be the same as region code

 

 

 

 

 

of DVD disc.

 

 

 

 

 

• Has water condensation has occurred? If it has, remove

 

 

 

 

 

the disc and keep the player powered up for at least

 

 

 

 

 

two hours.

 

 

 

 

 

Make sure system connection is correct.

There

is

no

sound.

• Make sure the speakers are turned on.

Make sure the sound setup of DVD disc is correct.

 

 

 

 

 

 

 

 

Is your disc dirty or warped? Clean

or replace disc.

 

 

 

 

 

There

is

no

picture.

• Make TV is turned on and in correct video mode.

• Make sure your system connection is correct.

 

 

 

 

 

 

 

 

 

 

Poor

AV

performance.

Is your disc dirty or warped? Clean

or replace disc.

Cannot continue to play and play

• Make sure the player is not in A-B repeat status.

Press A-B button to cancel it A-B

repeat status.

a section

repeatedly.

 

Is your disc dirty or warped? Clean

or replace disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Make sure there aren’t any obstructions between the

 

 

 

 

 

remote control and the player.

 

The remote control does not work.

• Make sure you are pointing the remote control at the

 

player.

 

 

 

 

 

 

 

 

 

 

 

• Make sure batteries are inserted correctly (check polarity).

 

 

 

 

Replace weak batteries.

 

 

 

 

 

 

 

 

WARNING: Do not touch any metal objects to the battery connectors, as it will put the battery in standby mode. To get out of standby mode please connect the battery and portable DVD player to AC or DC power.

Other possibilities:

Static or other external interfere may cause the player to function abnormally. In this circumstance unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, disconnect the power and consult your service center or a qualified technician.

- 27 -

Page 27
Image 27
Polaroid PDV-0800 operation manual Troubleshooting, Symptom What To Check