Polaroid PDV-1008N operation manual Troubleshooting, Symptom What To Check

Troubleshooting

Symptom			What To Check
		• Make sure the AV IN/OUT switch on the side of the
			player unit is in the OUT position for standard play.
		• Make sure the disc cover is closed.
		• Make sure a disc is loaded.
		• Make sure the disc isn’t loaded upside down.
The player doesn’t play.		•	Disc should be clean, not dirty or warped.
		• Player’s region code should be the same as region
			code of DVD disc.
		• Has water condensation has occurred? If it has,
			remove the disc and keep the player powered up
			for at least two hours.
		• Make sure system connection is correct.
There is no sound.		• Make sure the speakers are turned on.
		• Make sure the sound setup of DVD disc is correct.
		• Is your disc dirty or warped? Clean or replace disc.
There is no picture.		• Make sure TV is on and in correct video mode.
		• Make sure your system connection is correct.
Poor AV performance.		•	Is your disc dirty or warped? Clean or replace disc.
Cannot continue to play and		• Make sure the player is not in A-B repeat status.
		• Press A-B button to cancel A-B repeat status.
play a section repeatedly.
		• Is your disc dirty or warped? Clean or replace disc.
		• Make sure there aren’t any obstructions between
			the remote control and the player.
The remote control does	not	• Make sure you are pointing the remote control at
			the player.
work.
		• Make sure batteries are inserted correctly (check
			polarity).
		•	Replace weak batteries.

Other possibilities:

Static or other external interfere may cause the player to function abnormally. In this case unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, disconnect the power and consult a qualified technician.

- 25 -