Polaroid ProCamCamera manual Date display buttons, To set a date

Date display buttons 15

The date display buttons (picture

9)on the control panel allow you the option to imprint a date and/ or time (1.8mm high) in the upper left-hand corner of your photo- graphs.The date display buttons are used to set the display to Jap- anese, U.S. or European date mode, day-hour mode or off mode.

To set a date:

1Press MOD (mode) repeatedly until the desired date mode is 1 displayed (Japanese, U.S. or Euro- pean).The MOD (mode) button toggles through the following options: Japanese date, day-hour, off, U.S. date and European date. An M will be visible in the date display to indicate which digit is the month.

2Press SEL (select) to select the year, month or day (see blinking digit).

3Press SET repeatedly (or hold but- ton) until the desired digit is dis- played. Repeat steps 2 and 3 until the desired year, month and day are all set.

4Press SEL (select) a fourth time to lock in the date.

Setting the time (in day-hour- minute model)

1Press the MOD (mode) button until the day, hour and minute mode is displayed.The first set of digits visible in the display is the day of the month, followed by the time in hours and minutes in European (or U.S. military) time (ex. 13:00 = 1:00 p.m.).

2Press SEL (select) and the hours will blink. Press SET (set) to toggle through the hours. Press SEL (select) again to lock-in the hour and the minutes will blink.

3Press SET (set) to toggle through the minutes. Press SEL (select) again to lock in the minutes. (The colon will be blinking).

4Press SEL (select) a fourth time to lock in the desired time (starting at the hours and minutes displayed and zero seconds).