Polaroid Splash II Loading the Batteries, About the Film Speed, Loading the Film

Models: Splash II

1 62
Download 62 pages 58.85 Kb
Page 4
Image 4

En

Thank you for buying this 2 in 1 compact camera. Before using, please read this manual carefully to ensure correct use.

Loading the Batteries

1. Open the Battery Compartment by sliding the latch on the Battery Compartment Door to the direction of the arrow. (Fig. 1)

2. Gently lift up on the Battery Compartment Door. (Fig. 1)

3. lnsert two AAA alkaline batteries into the Battery Compartment, checking that the (+) and (-) on the battery are aligned according to the polarity information shown on the contact plate. (Fig. 2)

4. Close the Battery Compartment Door by pushing it back until it latches.

About the Film Speed

The Camera is designed to use DX-coded ISO100 or 400 film. When the film is loaded, the camera automatically sets the correct film speed by reading the black- and-silver pattern on the film cassettes. If DX-coded ISO 200 film is loaded, film speed will be set to ISO400. If non DX-coded film is loaded, film speed will be set to ISO100 automatically.

Loading the Film

1. Open the Film Compartment Door by pressing upward on the Film Door Latch and gently lift up the Film Compartment Door. (Fig. 3)

2. Insert the film into the Film Compartment, and pull out the film leader to reach the Film Tip Mark. (Fig. 4)

3.Make sure the film perforations engage the film Sprocket Gear, and the film lies -3-

515216-EN 3

8/17/04, 9:51:25 AM

Page 4
Image 4
Polaroid Splash II instruction manual Loading the Batteries, About the Film Speed, Loading the Film