Section 4 - Camera Hardware

wires connects to the CFW-6. The black wire of the three-wire group mates to the brown or black wire of the CFW-6.

4.7 Battery Operation

The ST-7E/8E/9E can be operated off of a 12 volt car or marine battery using a the optional 12V power supply or using a power inverter. We have used the Radio Shack model 22-132A, 12 volt DC to 115 volt AC Portable Power Inverter (140 watt) with good success. The camera draws 2..2 amps from the battery with this inverter, which should enable an evening's operation from a single battery. We recommend a separate battery for the camera; using your vehicle's battery with the engine running may add undesirable readout noise, and using your vehicle's battery without the engine running may result in a long walk home in the dark!

Page 31

Page 35
Image 35
Polaroid ST-8E, ST-9E, ST-7E manual Battery Operation