On/Off Surround Button
This button switches between surround sound and 2 channel stereo.
IMPORTANT NOTE: The Dolby Digital
1.The DVD player is not set to send out a 5.1 channel Dolby Digital signal. In this case check the DVD player’s operation manual.
2.The 5.1 soundtrack has not been selected on the DVD disc. In this case press the disc menu button on your DVD player to access the DVD disc’s menu, and select Dolby Digital 5.1 on the disc’s
3.The DVD disc does not have a 5.1 surround soundtrack. This is especially true of
Multi-Room Button
Pressing this button switches the
Tune 
Buttons
When either the AM or FM sources are selected, these buttons allow you to manually tune AM and FM radio stations. Pressing the
button moves the tuner up the radio band. Pressing the 
button moves the tuner down the radio band. The tuner stops as soon as you release your finger from the button. See page 21 for more information on using this feature.
Save Presets Button
When you want to select a radio station as a preset station, manually tune to that station, press and hold this Save Presets button for 4 - 5 seconds. You will see the red MEMO light on the display flash. When the MEMO light stops flashing, the radio station has been saved and assigned the next available preset slot number. You may preset up to 30 AM and 30 FM radio stations. See page 22 for more information on using this feature.
Clear Button
When you want to clear a radio station from the list of presets, select that preset station, then press and hold the Clear button until CLEAR appears on the display. See page 22 for more information on using this feature.
Presets ▲▼ Buttons
These buttons select from the list of preset radio stations. Pushing the ▲ button moves from lower preset numbers to the higher preset numbers. Pushing the ▼ button moves down through the list of preset stations.
Aux Inputs Jacks
These auxiliary video/audio input jacks are revealed by removing the oval rubber cover. They accept the connection of a camcorder, portable VCR, or any other temporary source. To make proper connections, refer the owner’s manual of the auxiliary component.
WHAT THOSE TEENY LITTLE LIGHTS MEAN
Radio Signal Strength Meter
This meter shows the relative signal strength of a radio signal. For best reception, orient your antenna to get the maximum number of bars on this meter.
Test Tone Indicator
This light illuminates when the surround sound balance test tone is engaged. You should hear a “ssshhhhh” noise from one speaker when this is on. See page 19 for more information.
Memory or Memo Indicator
This light illuminates when saving preset radio stations. See page 22 for more information.
FM Auto Indicator
Shows that the tuner is prepared to receive a stereo FM broadcast.
Tuned Indicator
This lights when a radio station has been properly tuned in.
FM Stereo Indicator
Lights when a stereo FM broadcast is received.
Surround Mode Indicators
Indicates whether the system is delivering Stereo, Dolby Pro Logic, or Dolby Digital sound. See page 23 for more information.
Digital Input Indicators
Indicates which digital audio input is selected and operating.
Late Night Indicator
Indicates that the late night compression circuit is engaged. See page 22 for more information on this function.
Preset Scan Indicator
Lights when the tuner is scanning through the radio station presets.
Multi-Room Indicator
Lights when the multi room function is engaged. See page 24 for more information.
16 | www.polkaudio.com |
