Polk Audio CHT400 Home Theater, Receiver/Processor, Subwoofer Hookup, F/X Wireless Surround

Models: CHT400

1 40
Download 40 pages 5.89 Kb
Page 11
Image 11
SPEAKER AND SUBWOOFER HOOKUPS FOR CHT SURROUNDBARS

SPEAKER AND SUBWOOFER HOOKUPS FOR CHT SURROUNDBARS

SUBWOOFER

HOME THEATER

 

RECEIVER/PROCESSOR

SUBWOOFER HOOKUP

To hook up a subwoofer,use a single RCA cable and make the connection from the SUB OUT connection on your receiver to the LFE input on your subwoofer. (See wire hookup diagram above.) If no LFE input

is available, use LINE R or L and turn “Low Pass” fully clockwise.

Recommended Polk Audio Subwoofers: PSW111,

DSWPRO440wi, DSWPRO550wi & DSWPRO660wi.

OPTIONAL SATELLITE LOUDSPEAKER HOOKUP

Dedicated satellite/surround loudspeakers may be employed to create an even more enveloping surround experience.

SURROUNDBAR 400 CHT:

Do not connect the provided loudspeaker cable’s Surround and Surround Back conductors to your receiver. Instead, connect your dedicated surround speakers to these amplifier outputs. Be sure to “tie off” the unused Surround and Surround Back wires.

For LCR Mode: Connect the Surround Left (SL), Surround Right (SR), Surround Back Left (SBL) and Surround Back Right (SBR) channels from the outputs of your receiver to the corresponding inputs on the four satellite loudspeakers.

For 5CH Mode:

Connect the Surround Back Left (SBL) and Surround Back Right (SBR) channels from the outputs of your receiver to the corresponding inputs on the two satellite loudspeakers.

For 7CH Mode: Do not connect any satellite loudspeakers to your receiver. The SurroundBar reproduces all 7 channels.

Note: Be sure to “tie off” the unused channels on the provided cable.

F/X® WIRELESS SURROUND

Polk Audio offers a unique, wireless single-enclosuresurround sound loudspeaker. The F/X Wireless Surround sits behind your listening area on the floor, a table or shelf. A 2.4 GHz transmitter connects to your receiver and communicates with the F/X loudspeaker, which will reproduce both Surround and Surround Back channels when properly configured and the SurroundBar CHT set in LCR mode.

For more, go to www.polkaudio.com/homeaudio/fx/.

Customer Service Hours of Operation: Monday-Friday,9AM-5:30PM EST

polkcs@polkaudio.com

11

Page 11
Image 11
Polk Audio CHT400 Home Theater, Receiver/Processor, Speaker And Subwoofer Hookups For Cht Surroundbars, For 5CH Mode