KIRK 5020 5040 UK_FR_DE_ES_IT.book Page 14 Thursday, February | 0 |
opportunity to maintain uninterrupted telephone service. If you experience trou- ble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to local regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.
SAR: Device has been tested for SAR compliance for head and body worn con- figurations. The highest reported SAR values are: head 0.049 W/kg (5020) / 0.206 W/kg (5040), and body worn 0.075 W/kg (5020) / 0.330 W/kg (5040).
IC Note: Operation is subject to the fol-
14
