| set radio-profile RealRadio auto-tune power-backoff- |
| timer 10 |
| set radio-profile RealRadio active-scan disable |
| set radio-profile RealRadio qos-mode svp |
| set radio-profile default 11g-only disable |
| set radio-profile default beacon-interval 100 |
| set radio-profile default dtim-interval 1 |
| set radio-profile default max-tx-lifetime 2000 |
| set radio-profile default max-rx-lifetime 2000 |
| set radio-profile default rts-threshold 2346 |
| set radio-profile default short-retry 5 |
| set radio-profile default long-retry 5 |
| set radio-profile default frag-threshold 2346 |
| set radio-profile default preamble-length short |
| set radio-profile default auto-tune channel-config |
| enable |
| set radio-profile default auto-tune power-config disable |
| set radio-profile default auto-tune channel-interval |
| 3600 |
| set radio-profile default auto-tune power-interval 600 |
| set radio-profile default auto-tune channel-holddown 300 |
| set radio-profile default auto-tune power-backoff-timer |
| 10 |
| set radio-profile default active-scan enable |
| set radio-profile default wmm enable |
| set dap security optional |
| set port type ap 1 model mp-422 poe enable |
| # AP Basic Configuration |
| set port type ap 1 model mp-422 poe enable |
| set ap 1 name <name> |
| set ap 1 bias high |
| set ap 1 blink disable |
| set ap 1 upgrade-firmware enable |
| set ap 1 group none |
| set ap 1 radio 1 channel 6 tx-power2 radio-profile |
| RealRadio mode enable |
| set ap 1 radio 1 auto-tune max-power default min-client- |
| rate 5.5 max-retransmissions 10 |
| set ap 1 radio 2 channel 36 tx-power 17 radio-profile |
| default mode disable |
| set ap 1 radio 2 auto-tune max-power default min-client- |
| rate 24 max-retransmissions 10 |
| set port type ap 2 model mp-422 poe enable |
14 | PN: 1725-36060-001_D.doc |
