Configuration Guide
For each AP, follow the steps in the following sections:
AP properties
1.In the Wireless APs screen, click the AP Properties tab. Select an AP to configure. Here you can assign a meaningful name to each AP.
2.Enable Telnet Access. This is useful for troubleshooting the setup and configuring security settings.
802.11b/g settings
1.In the Wireless APs screen, select the 802.11 b/g tab.
2.Select an AP to configure.
3.Under Base Settings:
a.Set the DTIM Period to 3.
b.Set the Beacon Period to 100.
c.Set the RTS/CTS Threshold to 2346.
d.Set the Frag. Threshold to 2346.
20 | PN: |
