Configuration Guide
PN: 1725-36071-001_C.doc
6
Initial Setup 1. The following instructions are for configuring a wireless controller
and a number of access points with no prior configuration.
2. All of the initial setup is done via a web interface. Connect a
‘Cross-Over’ Ethernet cable directly from the Management Port of
the controller to a PC’s Ethernet port.
3. Log onto the controller by opening a web browser and connect to
https://192.168.10.1:5825/. The default username is admin; the
default password is abc123.
4. Do this step only if it is necessary to reset the controller back to its
factory default configuration:
a. Click the Wireless Controller button to open the Wireless Controller
Configuration screen.
b. In the navigation pane, click System Maintenance.
c. Click the Reset database to factory default and reboot button.
d. Click the Apply button.
This will reset the database and cause the controller to reboot.
It will take three to four minutes before the controller is
finished.