Anritsu ME7840A manual Cal Files Setup.Txt, Header Section, Calibration Specifications, A-12

CAL FILES SETUP.TXT CAL SPECIFICATION FILES

Header

Section 1

ndut,1,	//Number of DUTs
type,powsweep
type,harm
￿type,imd
POWSWEEP_START
ncal,1,	//Number of Power Sweep calibrations
npts,3,	//Number of points (default for all)
if,3000,	//IF default
avgs,20,	//averages default
pow,-15,	//powerlevel start default
switch,8,	//switch setting

CAL,1, name,PowSweep,//File name root (append _1 for DUT1, _2 for

	DUT2, etc
f1,900,	//Main Tone	MHz
￿f2,931,	//Offset KHz

Calibration Specifications	Section 2
	Section 3

￿

￿

￿

POWSWEEP_END
HARM_START
ncal,1,	//Number of Harmonic calibrations
if,3000,	//IF default
avgs,20,	//averages default
pow,0,	//power level start default
switch,8,	//switch setting

CAL,1, name,Harmonics,//File name		root (append _1 for DUT1, _2 for DUT2,
	etc
f1,900	//Main Tone	MHz
f2,3000,	//Max Range	MHz
HARM_END
IMD_START
ncal,1,	//Number of	IMD calibrations
npts,4,	//
pow,-15,	//power level setting dBm
if,30000,	//IF Bandwidth
avgs,250,	//Averages
switch,8,	//switch setting
CAL,1, name,Imd,	//File name	root (append _1 for DUT1, _2 for DUT2,
	etc
f1,900,	//Main Tone	MHz
f2,977,	//Offset KHz

IMD_END

Figure A-2.Cal Files Setup Calibration Specification File

A-12 ME 7840A OMM