Anritsu ME7840A 6-10, Receiver Display Linearity, Performance Verification, ME 7840A OMM, Step

RECEIVER DISPLAY LINEARITY PERFORMANCE VERIFICATION

Step 25.	Press Power key and select SOURCE 1 SETUP.
Step 26.	Set PORT 1 ATTN to 10 dB. Record the Power Meter Readout
	and the Marker 1 Readout to the table on next page. Repeat
	this step for other PORT 1 ATTN setting listed in the table.
Step 27.	Verify if the difference of the two measured values are within
	specifications (Table 6-2).

Table 6-2.Receiver Magnitude Display Linearity Specifications

PORT 1 ATTN	Power Meter	MS462XC Marker 1 Reading	Difference Between Two	Specification
Setting (dB)	Reading		Readings
10				￿0.1 dB
20				￿0.1 dB
30				￿0.1 dB
40				￿0.2 dB
50				￿0.2 dB
60				￿0.2 dB

6-10 ME 7840A OMM