Anritsu ME7840A manual Performance Specifications General Information, Characteristic Value

PERFORMANCE SPECIFICATIONS GENERAL INFORMATION

Table 1-3.Performance Specifications for ME7840A Power Amplifier Test System

Characteristic	Value	Notes
	100 W maximum	With MS4782D Test Set and with23 dB
Amplifier Under Test Power Output		isolation between AUT power output and
		MS4623C, Port 2
	50 W maximum	With MS4782A Test Set
Bandwidth through Test Set	800 MHz to 2.4 GHz	With MS4782D Test Set (Note 1)
	800 MHz to 1.0 GHz	With MS4782A Test Set
Amplifier Under Test Input Power range	￿85 to +5 dBm	At AUT input
available from PATS
IMD 3rd Order Dynamic Range	70 dB min	With 10 Hz IF Bandwidth @300 kHz tone
		separation and -20 dBm tone levels
Port Power Accuracy	±0.1 dB maximum	With flat power calibration
	±1 dB maximum	Without flat power calibration
Drift over 60 hours	0.15 dB maximum, peak to peak
Dynamic Range	80 dB minimum	Overall system, including test set
Port Match (test ports 1 and 2)	40 dB minimum	Corrected value
	13 dB minimum	Uncorrected value
Directivity	40 dB minimum	Corrected value
	Storage Temperature Range	40￿ C to +75￿ C
Environmental	Operating Temperature Range	0￿ C to +50￿ C
	Range Over Which Specifications Apply	23 ￿3￿ C
	Relative Humidity	5% to 95% at +40￿ C
	Height	152.5 mm (6 in.)
Physical, MS4782X Test Set	Width	444 mm (17.4 in.)
	Depth	500 mm (19.7)
	Weight	10 kg (22 pounds) or less

Note 1: This frequency range does not take into account any restricting effects of the external circulator (if one is used for reverse measurements)

1-14 ME 7840A OMM