Anritsu ME7840A manual 1-12, General Information, ME 7840A OMM, 1-15 MS7840A OPTIONS, Optional

MS7840A OPTIONS GENERAL INFORMATION

1-15MS7840A OPTIONS	The following options are available:
Table 1-2.MS7840A Options
Model	Option Number			Description
ME7840/1	1		Replaces MS4623C with MS4622C (3 Ghz option)
ME7840/2	2		Replaces MS4782D Test Set with MS4782A Test Set
ME7840/3	3		Delete Test Set (Note: The ND43425 Accessory and Inter-
			connect Kit will also be deleted with this option.)
1-16OPTIONAL	The accessories described below are available from ANRITSU.
ACCESSORIES	￿ Model ML2430A Power Meter
	￿ Model MG3672A Digital Modulation Signal Generator/with
		MG0314A W-CDMA Modulation Unit
	￿ Model MS2602A Spectrum Analyzer
	￿ Model MS8607A Digital Mobile Radio Transmitter Tester
	￿ AC/DC Current Probe (for AUT drain current and
		power-added-efficiency (PAE) measurements) (See below).
		Max Current		Accuracy (at lesser cur-	ANRITSU Part Number
				rent range setting)
		100 mV/A: 10A		3% of reading ￿50 mA	2000-1067
		10 mV/A: 100A
		1 mV/mA: 1A		2% of reading ￿5 mA	2000-1085
		10 mV/A: 80A

￿Circulators to be used externally with the MS4782D Test Set (see below).

Frequency Band	Isolation	Max AUT Power	ANRITSU Part
			Number
800 to 1000 MHz	20 dB min	50 watts	1000-50
1.8 to 2.5 GHz	20 dB min	50 watts	1000-52
1.8 to 2.5 GHz	22 dB min	79 watts	1000-53

Note: All circulators have 3 SMA female connectors.

￿15SS50-0.35B Cable Assembly. Three of these cables can be used to connect any one of the external circulators offered above to the

1-12 ME 7840A OMM