Anritsu ME7840A manual Test Equipment, Operations, Calibration, ME 7840A POM

TEST EQUIPMENT OPERATIONS, CALIBRATION

Alternatively, Scorpion front panel settings may be set manually and ap- plied during the automated measurements under PATS software as fol- lows:

￿ On the Measurement Window click the Pause button

￿ On the Scorpion front panel press the “Clr / Local” button to take manual control of the Scorpion.

￿ Use Scorpion front panel controls to set the desired settings and/or

	to perform a new calibration. (Note: Unless a new calibration is per-
	formed, the manual settings must be consistent with the calibration
	to be applied).
	￿ Use the “Save Cal File to PC.” (Refer to Appendix A for detailed in-
	formation on how to use the “Calibration Specification Files.”
4-4TEST EQUIPMENT	A power meter, power sensor, and Type N calibration component kit is re-
	quired for power level and S-parameters calibrations. See Table 1-2, page
	1-12.

4-2 ME 7840A POM