Anritsu Appendix A, Calibration Specification, Files, ME7840A OMM, Introduction, File Types

		Appendix A
		Calibration Specification
		Files
A-1	INTRODUCTION	This appendix describes the Calibration Specification Files that are used
		to specify calibrations that are performed when accessing “Tools,” “Run
		Calibration Procedures” in the PATS software. It lists file types, describes
		how to open the files for edit, provides technical details of the files, and
		shows typical file listings.
A-2	FILE TYPES	There are four files that specify calibrations for (A) Power Level; (B) Hot
		S22; and (C) S-Parameters; (D) Cal File Setup for Receiver Cal, IMD,
		Power Sweep, and Harmonics.
A-3	OPEN FILES	To view or edit the specification files, highlight the filename and right
		click the mouse to display a dialog box. Left click on “Properties” then on
		“Open” to open the file in Notepad.
A-4	TECHNICAL	Technical details on how to construct and edit Calibration Specification
	DETAILS	Files are provided in Table A-1.

ME7840A OMM A-1