Anritsu manual S-Parametertest K Factor, Operations, Measurement, ME7840A OMM, Test K Factor

OPERATIONS, MEASUREMENT S-PARAMETER TEST: K FACTOR

5-6S-PARAMETER	This test describes the K Factors measurement. This measurement is
TEST: K FACTOR	described in Chapter 1, paragraph 1-10.
	Procedure.
		Prepare the ME7840A as shown in Chapter 3.
		Enter the appropriate test values in the displayed
		User Input screen. The input fields are described
		below: The inputs required for this test are de-
		scribed below.
		￿ S-Parameter:Drop down options. K Factor for
			this measurement.
		￿ Data Points: Drop down options ￿ number of data
			points in frequency sweep.
		￿ Frequency 1 (MHz): Lower frequency or start fre-
			quency.
		￿ Frequency 2 (MHz): Upper frequency or stop fre-
			quency.
		￿ Input Power (dBm):Input power level, in dBm.
		￿ IF Bandwidth (Hz):Intermediate frequency band-
			width for test, in Hertz.
		￿ Test Set Setting: Byte value for setting test set
			attenuation and source switch (below).
			Internal Source	Value	External Source	Value
			0 dB	8	0 dB	0
			10 dB	9	10 dB	1
			20 dB	10	20 dB	2
			30 dB	11	30 dB	3
			40 dB	12	40 dB	4
			50 dB	13	50 dB	5
			60 dB	14	60 dB	6
			70 dB	15	70 dB	7

ME7840A OMM 5-7