Anritsu manual Cal Specification Files, Technical Details, ME7840A OMM

CAL SPECIFICATION FILES TECHNICAL DETAILS

Table A-1.Technical Details of Calibration Specification Files (8 of 9).

4.harm (Harmonics):

HARM_START Header Details

HARM_END

Header Section Keywords:

ncal	Number of calibration sequences of this type to run.
if	IF bandwidth: Legal values are 10, 30, 100, 300, 1000, 3000, 10000, 30000
avgs	Averages: (Optional). Software will set averaging to value (and turn on) during cal.
pow	Start power level for sweep: Set on for Source 1.
switch	Setting for test set. Correponds to 0￿15 settings.
Detail Section Keywords:
CAL, 1	First calibration
name	Name of *.cal file to save when calibration sequence completes.
f1	Main tone, MHz
f2	Maximum display range, MHz
	NOTE: Minumum display range is automatically set to 100 MHz.
Example	Refer to Figure A-2(page A-12).

ME7840A OMM A-9