Anritsu ME7840A manual Installation - Hardware, ME 7840A OMM, Step

INSTALLATION - HARDWARE INSTALLATION

A listing of the non-optional-accessories always supplied with PATS is listed below. The cables and terminators are shown in Figures 2-3and 2-2, on page 2-3.

Item	Part No.	Quantity
Broadband Termination	28N50LF	2
Control Cable	803-49	1
RF Cables, Type N connectors (front)	15NN50-0.25B	3
RF Cables, SMA connectors (rear)	15NN50-0.35B	4

2-4INSTALLATION -	System hardware is set-up is a straight-forward process. Follow the
HARDWARE	steps below in sequence to ensure a trouble free installation.
	Step 1.	Place the MS462XC on top of the MS4782X Test Set. Figure
		2-1shows how the green colored feet on the case of each unit
		stack on each other.

Foot

Foot

Figure 2-1.ME7840A Component Assembly

Step 2. Install the three front RF interconnect cables. Figure 2-3(fol- lowing page) shows the installation of the RF interconnect ca- bles between the front panel of the MS462XC and the front panel of the Test Set. Table 2-1lists the applicable connectors by designation or function.

2-2 ME 7840A OMM