Anritsu manual Recommended Items, 1-15/1-16, General Information, ME7840A OMM, User Supplied

GENERAL INFORMATION RECOMMENDED ITEMS

1-20RECOMMENDED	Table 1-2provides a list of test equipment and other items needed for cal-
ITEMS	ibration and performance verification.
Table 1-4.Recommended Test Equipment
Item		Critical Specification/Notes	Manufacturer/Model
Power Meter		GPIB capable	ANRITSU Model ML243XA
Power Sensor		10 MHz to 6 GHz	ANRITSU Model MA247XA
N connector Calibration Kit		Type N Open, Short, Broadband Load	ANRITSU Model 3653 or 3753LF
Offset Termination		6 dB	ANRITSU Model SC5237
Offset Termination		20 dB	ANRITSU Model SC5270
Power Divider			ANRITSU Model 11N50B
Cable		50 Ohm, N-male to N-male	ANRITSU Model 3670NN50-2
Adapter		50 Ohm, N-male to N-male	ANRITSU Model 34NN50A r
GPIB Cable		None	ANRITSU 2100-2
SMA/3.5 mm Connector Calibration Kit		Required if amplifier-under-test (AUT)	ANRITSU 3750LF
		has SMA/3.5 mm connectors

1-21USER SUPPLIED	The following items required for the operation of the ME7840A Power
ITEMS	Amplifier Test System must be supplied by the user.
Item	Critical Specification
Personal Computer (PC)	Pentium II or better, 200 MHz or faster, with Windows￿ 95/98/2000 or NT operating
	system and National Instruments GPIB card installed.

GPIB Cable

None

ME7840A OMM 1-15/1-16