Anritsu manual A-13, Cal Specification Files, ME7840A OMM, A-7 HOT S22.TXT

CAL SPECIFICATION FILES HOT S22.TXT

A-7HOT S22.TXT The HotS22.txt file is shown in Figure A-3.

ndut,1,	//Number	of	DUTs
type,sp,	//S Parameter calibration
SP_START
ncal,1,	//Number	of	S-Param calibrations
npts,201,	//Number	of	points (default for all)
con,FN,FN,	//Connector		Type Options MN,FN,MK,FK,MS,FS
if,3000,	//IF default
avgs,0,	//averages default
pow,-5,	//power level default
switch,8,	//switch	setting
CAL,1, caltype,RR,	//12 = 12 Term, RR = Relection only Reverse, RF =
	Relection		only Forward
name,Hots22,	//File name		root (append _1 for DUT1, _2 for DUT2, etc
hot,923,	//hot 0	means turn on 2nd source during cal (Hot S22
	only),
	//use value		as offset (KHz)
pow2,-5,	//2nd source power in Hot S22
f1,800,	//startf	DUT1 DUT2 DUT3
f2,1000,	//stopf	DUT1 DUT2 DUT3

SP_END

END

Figure A-3.Hot S22 Calibration Specification Program File

ME7840A OMM A-13