Anritsu manual For Safety, Repair, ME7840A OMM

For Safety

WARNING

Always refer to the operation manual when working near locations at which the alert mark, shown on the left, is attached. If the operation, etc., is performed without heeding the advice in the operation manual, there is a risk of personal injury. In addition, the equipment perfor- mance may be reduced.

Moreover, this alert mark is sometimes used with other marks and de- scriptions indicating other dangers.

WARNING

When supplying power to this equipment, connect the accessory 3-pin power cord to a 3-pin grounded power outlet. If a grounded 3-pin outlet is not available, use a conversion adapter and ground the green wire, or connect the frame ground on the rear panel of the equipment to ground. If power is supplied without grounding the equipment, there is a risk of receiving a severe or fatal electric shock.

		WARNING
Repair	This equipment can not be repaired by the operator. DO NOT attempt to
	remove the equipment covers or to disassemble internal components.
	Only qualified service technicians with a knowledge of electrical fire
	and shock hazards should service this equipment. There are
	high-voltage parts in this equipment presenting a risk of severe injury
	or fatal electric shock to untrained personnel. In addition, there is a
	risk of damage to precision components.

WARNING

Use two or more people to lift and move this equipment, or use an equipment cart. There is a risk of back injury, if this equipment is lifted by one person.

Safety 1 ME7840A OMM