Siemens: HiPath Wireless System with 2610, 2620 APs
Wireless APs address assignment
1.After all the APs have been connected and discovered by the controller, click Wireless APs tab.
2.Click the Static Configuration tab.
3.Select an AP to configure. The AP’s name will default to their MAC address.
4.Under IP Address Assignment click either the Use DHCP or the Static Values option. If selecting Static Values, assign the proper values.
5.Under Wireless Controller Search List add the IP address of the controller port.
6.Repeat steps 4 and 5 for each access point.
7.Click the Save button.
PN: | 19 |
