Polycom 1725-36203-001 manual Softkeys, Locked

Getting Started with Your SpectraLink 8020/8030 Wireless Telephone

Indicator	Function
	Up and down arrows are displayed when the menu has additional options
	above or below.
	Left or right arrows are displayed during editing when the cursor may be
	moved left or right.
	The location service icon indicates the Real-Time Location System (RTLS)
	is enabled.
Locked	Locked indicates that the keypad is locked to prevent accidental activation.
	Use the Unlk softkey plus the # key to unlock it.
[No Service	If warning tones are not disabled, an alarm will sound and a descriptive
message]	message displays when the handset cannot receive or place calls. You
	may be outside of the covered area. Walk back into the covered area. The
	in-service tone indicates service is reestablished.
	The download icon indicates that the handset is downloading code. This
	icon only appears while the handset is running the over-the-air downloader.
	It appears to the right of the signal strength icon in the same location as the
	voicemail icon.
	The download failure icon indicates that the handset has failed to download
	code because the code is incompatible with the handset hardware. Contact
	your system administrator should this icon appear.
XXXX	During character entry, indicates current data entry symbol mode.

Softkeys

Certain softkeys are standard with all handsets and others are locally programmed.

Step through locally-programmed softkeys by going off-hook (press START) and then press the FCN key. The softkeys displayed while in the active mode are programmed to telephony features available in your facility. Up to 16 softkeys may be programmed and they are displayed four at a time. Press FCN repeatedly to step through each set.

If you have questions about any softkey not on this list, see your system administrator.

Softkey	Name	Displayed during…	Press to…
<<	Cursor backward	Entering a dial number.	Move the cursor back one position.
>>	Cursor forward	Entering a dial number.	Move the cursor forward in
			alphanumeric mode. If the cursor is
			at the end of the line, adds a space
			character.
Bksp	Backspace	Entering a dial number.	Delete the character prior to the
	character		cursor position.
Back	Back one screen	Displaying a menu.	Exit the menu, move back one
			screen.

1725-36203-001-F.doc 15