Polycom 500 manual Making and ending computer calls, Answering a computer call, Recording a call

2.Ensure you have turned on the

Bluetooth mode. Press and hold the Mode button for at least 3 seconds and ensure the blue LED is fast blinking (discovering). You will hear a series of tones on VoiceStation™

500indicating that your Bluetooth device has discovered the VoiceStation™ 500.

On your Bluetooth device, select PLCM VS500 as the discovered device and when prompted for the Password, enter ‘0000’. (Follow the prompts on your computer) Once the Bluetooth-enabled device is paired with VoiceStation™ 500, the blue LED should be steady (On). A confirmation tone will also be heard on the VoiceStation™ 500.

Making and ending computer calls

1.Press the On/Off button on VoiceStation™ 500 to link to the computer.

2.Dial the phone number.

3.When finished, terminate the call as you normally would with your computer.

Answering a computer call

1.Ensure the mobile phone is paired with the VoiceStation™ 500.

2.When the computer call rings, answer it as you normally would on the computer.

Ending the mobile phone call using VoiceStation™ 500

•Disconnect the call on your mobile phone as you normally would.

Redialing the last dialed number using VoiceStation™ 500 for computer calls

•Not available.

Transferring audio between VoiceStation™ 500 and computer

1.In order to transfer audio from VoiceStation™ 500 and the computer (or vice-versa), you must

de-link the two devices. You can do so in two ways:

•Press and hold the Mode key for at least 3 seconds on the VoiceStation™ 500.

•From your computer calling applica- tion, right-click your mouse and follow the instructions to de-link the

Bluetooth connection.

Changing between computer calls using VoiceStation™ 500

•Not available.

Muting a call on VoiceStation™ 500

•Press the Mute button on the

VoiceStation™ 500 to mute/unmute a call as described in the “POTS Mode” section of this User Guide.

Changing Volume

•Press the Volume Up and Volume Down buttons on the VoiceStation™ 500 to adjust the volume to the desired level as described in the

“POTS Mode” section of this User

Guide.

Recording a call

•Please refer to the ‘Record a Con- versation’ as described in the “POTS Mode” section of this User Guide.

Making a POTS call while in Bluetooth mode on computer

1.If you are in a call using your Blue- tooth device, place the call on hold by pressing the Hold button on the VoiceStation™ 500.

2.Press the On/Off button on the VoiceStation™ 500 to place a POTS call.

VoiceStation™ 500 - 11