5.Connect the other end of the short tele- phone cable to a jack wired for a standard analog phone line.
► Do not plug the VoiceStation™ 500 into a digital telephone network. Doing so may damage the phone.
6.Place VoiceStation™ 500 in the center of the room on a flat, stable surface and press the Volume Up and Volume Down buttons to adjust the Ringer.
► The Ringer has three modes: High, Low, and Off. The Ringer sounds when you press the Volume buttons to indicate current status.
►When the On/Off indicator light is on, the Volume buttons control the sound level of the speaker. ►When the On/Off indicator light is off, the Volume buttons control the ringer volume.
7. Press the On/Off button to obtain a dial tone.
►If you do not hear a dial tone, you may not be connected to an analog telephone line. For assistance, contact your System Admin- istrator.
Using VoiceStation™ 500
The Polycom® VoiceStation™ 500 supports three modes of operation:
•POTS Audio
•Bluetooth Audio (headset and hands- free profile)
•Wired Audio Mode (2.5mm)
The Link Indicator is off when the phone is in normal POTS mode. The Link Indicator will be slowly flashing blue when the VoiceStation™ 500 is in Bluetooth mode, and it will be solid amber when
the phone is in Wired Audio mode (with a cable connected).
When in POTS mode, inserting a 2.5mm cable enables Wired Audio Mode. To enter Wired Audio Mode, press the Mode button. The amber link indicator will come on. It is possible to make/answer Bluetooth and POTS calls when in Wired Audio Mode. For more information, refer to ‘Changing between calls in Wired Audio Mode’ on Page 15.
VoiceStation™ 500 - 5
