2.When the incoming call ring is heard, answer it as you normally would.
Redialing the last dialed number in Wired Audio Mode
•Redial the last number using the mobile phone or computer connected to the VoiceStation™ 500.
Transferring audio between devices in Wired Audio Mode
•The connector cable (mobile phone or computer) with 2.5 mm connec- tor needs to be removed from the mobile phone or computer.
Changing between calls in Wired Audio Mode
The Mode button can be used to swap be- tween the POTS, Bluetooth and the Wired Audio calls:
1.Making/Answering a POTS call when in Wired Audio Mode: Press the Mode button, press the On/Off button, make/answer the phone call. The Amber LED should not be lit.
When finished, press the On/Off button, then press the Mode button again.
2.Making/answering a Bluetooth call when in Wired Audio Mode: Press the Mode button, then make/answer the phone call. The Bluetooth LED should be on (blue). When finished, press the Mode button again. The
LED should return to amber.
Muting a call on VoiceStation™ 500
1.Press the Mute button on the
VoiceStation™ 500 to mute/unmute a call as described in the “POTS Mode” section of this User Guide or;
2.The mobile phone Mute/Unmute button can be used.
Changing Volume
1.Press the Volume Up/Down buttons on the VoiceStation™ 500 to adjust the volume to the desired level as described in the “POTS Mode” sec- tion of this User Guide or;
2.Use the mobile phone to adjust the volume.
Recording an audio call
•Please refer to the ‘Record a Con- versation’ section of this User’s
Guide as described in the “POTS Mode” section of this User Guide.
Disconnecting Wired Audio Mode on VoiceStation™ 500
1.End the phone call as you normally would.
2.Unplug the cable from the 2.5mm port on the side of the VoiceStation™ 500. The amber LED should turn off, bringing the VoiceStation™ 500 to POTS mode.
VoiceStation™ 500 - 14
