![](/images/new-backgrounds/1251603/25160379x1.webp)
Facility Preparation: SpectraLink 6000 System: SpectraLink 6300 MCU
Power Up and Check Diagnostics
Turn the power switch in the upper left of the Primary and Expansion Shelves ON.
After a slight delay, the lights on the cards will cycle through diagnostic tests.
After testing completes, lamp 1 should flash green, indicating that the card is running. If the Alarm light is red, there is a problem with the system. Refer to SpectraLink 6300 MCU: Maintenance and Diagnostics for troubleshooting information.
40 | PN: |