Polycom 6300 MCU manual About this Guide, Polycom Model Numbers, Related Documents

About this Guide

This manual describes the installation procedure for Polycom’s SpectraLink 6000 System with a SpectraLink 6300 Master Control Unit (MCU). The procedures described in this manual are those that take place after the installation-planning procedure. You should already know the equipment requirements and installation locations. For example, you should know where each Base Station will be installed, and how many Interface Modules are required.

Polycom Model Numbers

This document covers the following registered model numbers:

JPI300, MCS300, RCC400, RCO400, RCU100, RCU200, RCU201

Related Documents

SpectraLink 6300 MCU: Installation (1725-36122-001)

SpectraLink 6300 MCU: Maintenance and Diagnostics (1725-36123-001)

SpectraLink 6300 MCU: Open Application Interface (OAI) Installation and

Configuration (1725-36124-001)

SpectraLink 6300 MCU: Operator’s Console (1725-36125-001)

SpectraLink 6300 MCU: T1 Remote Module Installation (1725-36126-001)

Installing the Outdoor Base Station (1725-36127-001)

Available at http://www.polycom.com/usa/en/support/voice/proprietary_wire less/proprietary_wireless.html

1725-36121-001_J.doc 3