Answering a Call
Using the Handset:
Pick up the handset.
Using Hands-Free Speakerphone Mode:
Press 
, or with the handset on hook press the line key with the active indicator, or the Answr soft key.
Using the Headset:
Press 
to answer the call through an optionally connected headset.
In all cases, the active call will appear on the display showing call duration and destination.
Incoming calls may be ignored by pressing the Reject soft key or invoking Do Not Disturb during ringing. Note that Do Not Dis- turb stays active when the call is dropped and will remain so until toggled off.
Call Hold and Resume
During a call, press Hold or the Hold soft key. The call will be placed on hold and this will be indicated on the display. Press the Resume soft key, or the line key to retrieve the call.
Multiple Calls on Hold
If multiple calls are on hold on a single line key, use the arrow keys to switch be- tween the calls then press the Resume soft key to retrieve the desired call. If more than two calls are on hold on a single key, an indication will appear on the display, for example “2/3” shows that this is the
second call out of three calls.
If calls are on hold on more than one line key, the details of the calls on any line key can be viewed by pressing that line key and holding it down for a few seconds. If a line key is pressed briefly, the first call on hold on that line key will be retrieved.
Microphone Mute
During a call, press 
. The LED on the phone lights up and a flashing microphone on the display indicates that the other party (parties) cannot hear you.
To turn off Microphone Mute, press again.
Microphone Mute applies to all modes: handset, headset, and
8
VoIPon www.voipon.co.uk | sales@voipon.co.uk | Tel: +44 (0)1245 808195 | Fax: +44 (0)1245 600030 |
