Polycom Installing SoundPoint IP 430 SIP, Connecting Network and Power Source, AC Power Option

Installing SoundPoint® IP 430 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 430 SIP phone. If you require additional information or assistance with your new phone, please contact your sys- tem administrator.

The SoundPoint® IP 430 SIP User Guide includes regulatory compliance informa- tion that your system administrator should review and can also be found at www. polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the supplied Network cable be- tween the LAN jack on the phone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the power adapter to the DC 24V jack marked on the phone. Connect the country-specific AC cord to the power adapter.

Network Port

In-Line Power Option

Power Adapter (24V DC)

Optional PC

Connection

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power op- tion. Simply plug the supplied Network cable between the LAN jack on the phone and an available Power and Data port on the In-Line Power switch.

IEEE 802.3af compliant Power over Ethernet Hub/Switch (Terminal or Midspan)

Optional PC

Connection

2

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030