Multiple Call Appearances

Each line on the phone can be configured to have one or more call appearances. More than one call appearance is useful if there is an active call and an incoming call arrives on the same line. In the example shown, extension 2020 is in an outbound call with 2024. The second diagram shows an incoming call from John Brown. To answer this incoming call, put the original call on Hold or press the key to access the new call. Soft key labels will be updated on the display with these options:

1.Answr the incoming call.

2.Reject the incoming call.

3.Forward the incoming call to another exten- sion.

Answering the incoming call places the original call on Hold and refreshes the soft key labels as indicated (third illustration). If more than one call appearance is in use, one will appear on the display and the total number will be indicated by a counter at the top right corner of the display. For example “2/3” indicates that the highlighted call is the second one out of a total of three.

In the example case illustrated, another out- bound call can be placed on the same first line. Press Hold during the first call and press NewCall to obtain dial tone and a new call appearance for a second call.

 

 

 

16

 

 

VoIPon www.voipon.co.uk

sales@voipon.co.uk

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 600030

Page 19
Image 19
Polycom IP 430 SIP manual Multiple Call Appearances