Preparing the KIRK Wireless Server 1500 for Use

When preparing the KIRK Wireless Server 1500 for use it is necessary to use the Administration Program. In the Administration Program you change the flash software, register users, allow subscription of handsets and type the required pin code.

1Open the Administration Program version 8.09 or higher to change the flash software. The Administration Program window appears.

2Under Options, click Preferences.

14129600-HD, Ed.008/ Page 4

Page 4

Image 4

Polycom KIRK ISDN manual Preparing the KIRK Wireless Server 1500 for Use, Under Options, click Preferences

Contents

Polycom KIRK ISDN Interface Card User Guide 1. Introduction DocumentationDocuments Software 2.1 Changing Impedance of the KIRK ISDN Interface Card 2. Setting up the KIRK ISDN Interface CardThe PBX/Network must be set to Master whit Layer2 CRC check turned on Preparing the KIRK Wireless Server 1500 for Use 2 Under Options, click Preferences 5 In the Advanced Options tab, select the Allow Subscription checkbox 8 In the Advanced Options tab, click Restart System Configuring the ISDN IWU 2.2 Setting up the connection 2.3 Uploading new flash software to the ISDN IWU card 2 Click Filesetup connection 2.4 Changing parameters and using feature 1. Call forward and Call forward reply timerCall forward when Busy Call forward no reply 2. how to activate call forward 3. How to deactivate call forward4. Call Waiting ON/OFF 5. R-Key ON/OFF 2.5 Debugging and how to Make a Trace 11. Default and preset setting1. How to generate a normal trace 10. EEprom Key Param 14129600-HD, Ed.008/ Page