• Repairs attempted by unqualified

• Any electrical wiring or repairs

 

personnel can result in serious

required on this product should be

 

injury or death by electrocution.

performed by authorized service

 

 

 

 

 

 

 

center personnell in accordance

 

 

 

 

 

 

 

with national and local electrical

 

 

 

 

 

 

 

codes.

 

Electrical Grounding: Failure to

• Make certain that the electrical

 

provide adequate grounding to

circuit to which the compressor

 

this product could result in serious

is connected provides proper

 

injury or death from electrocution.

electrical grounding, correct voltage

 

Refer to "Grounding Instructions"

and adequate fuse protection.

 

paragraph in the "Installation"

 

 

section.

 

 

 

 

 

 

 

HAZARD

 

 

 

 

 

 

RISK FROM FLYING OBJECTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHAT CAN HAPPEN

HOW TO PREVENT IT

 

• The compressed air stream can

• Always wear certified safety equip-

 

cause soft tissue damage to

ment: ANSI Z87.1 eye protection

 

exposed skin and can propel dirt,

(CAN/CSA Z94.3) with side shields

 

chips, loose particles, and small

when using the compressor.

 

objects at high speed, resulting in

• Never point any nozzle or sprayer

 

property damage or personal injury.

toward any part of the body or at

 

 

 

 

 

 

 

other people or animals.

 

 

 

 

 

 

 

• Always turn the compressor off

 

 

 

 

 

 

 

and bleed pressure from the air

 

 

 

 

 

 

 

hose and air tank before attempt-

 

 

 

 

 

 

 

ing maintenance, attaching tools or

 

 

 

 

 

 

 

accessories.

 

 

 

 

 

 

HAZARD

 

 

 

 

 

 

 

 

 

 

 

 

 

RISK OF HOT SURFACES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHAT CAN HAPPEN

HOW TO PREVENT IT

 

• Touching exposed metal such as

• Never touch any exposed metal

 

the compressor head, engine head,

parts on compressor during or

 

engine exhaust or outlet tubes, can

immediately after operation.

 

result in serious burns.

Compressor will remain hot for

 

 

 

 

 

 

 

several minutes after operation.

 

 

 

 

 

 

 

• Do not reach around protective

 

 

 

 

 

 

 

shrouds or attempt maintenance

 

 

 

 

 

 

 

until unit has been allowed to cool.

5 - ENG

1000001703

Page 5
Image 5
Porter-Cable 1000001703 instruction manual Electrical Grounding Failure to, Risk from Flying Objects, Risk of HOT Surfaces