B.Diamond Pad for Hook & Loop Abrasives: The pointed tip of this pad is used for sanding into corners and intricately shaped areas. Precut, Hook & Loop Abrasives with dust extraction holes are used with this pad. The optional 14449 dust wand (and an external vacuum source), can also be used with this pad to provide dust collection (Fig. 3).
Fig. 2 | Fig. 3 |
C.Single Profile Mounting Plate: This plate is used to mount any one of the profiles in a vertical position, centered under the Profile Sander (Fig. 4). Special PSA Abrasives are available in precut sheets or in rolls that can be
D.Angled Profile Mounting Plate: This plate is used to mount any one of the profiles at a 30° outward angle on either the right or left side of the tool. (Fig. 5) This plate permits the profiles to be used in areas that are inaccessible with the Single Profile Mounting Plate. Special PSA Abrasives are available in precut sheets or in rolls that can be
E.Offset “Shutter” Pad: This pad permits access to recessed surfaces, such as those found on louvered shutters. (Fig. 6) Special PSA Abrasives are available in rolls that can be
|
|
|
|
|
Fig. 4 | Fig. 5 |
| Fig. 6 | |
SELECTING A PROFILE
Individual Profiles are available in three basic styles. Several sizes are available in each style (see a
Convex Profiles Used to sand concave surfaces. Available in several
sizes to match common configurations.
Concave Profiles Used to sand convex surfaces. Available in several sizes to match common configurations.
Angled Profiles Used to sand the bottom and sides of slots or grooves. Available in several angles to match common config- urations.
11
