Fig. 10
6.Plug the water pump cord into the motor plug receptacle (Fig. 10). NOTE: Place cord through the cord slot (Fig.11A), in the water tray.
Only plug water pump cord into motor receptacle.
7.Loosen the water hose clamp (A) Fig. 11B, and insert cable tie (Q) Fig. 1, through the water hose clamp. Secure water pump cord and motor cord to saw arm with cable tie as shown in Fig. 11C. Tighten the water hose clamp (A) Fig. 11B.
8.Secure water pump hose and cord to the cutting tray frame with cable tie (Q) Fig. 1, as shown in Fig. 11D.
ATTACHING THE SAW BLADE
NOTE: Use only continuous wet cut diamond blades rated at 6000 RPMs or greater.
1.Loosen knob (A) Fig. 12, and open the blade cover.
A
Fig. 12
Fig. 11A
A
Fig. 11B
Fig. 11C
Fig. 11D
11
