ATTACHING SAW ARM TO THE CUTTING TRAY
1.Insert the water pump hose into the largest hole in the side of the cutting tray (from the outside) Fig. 6, pull the hose through the hole.
2.Position the saw arm (C) Fig. 1, onto the cutting tray as shown in Fig. 7.
3.Insert 2 screws (G) Fig. 1, through the 2 holes on the inside of the cutting tray Fig. 8, and tighten securely.
4.Place the water pump (E) Fig. 1, into the bottom of the water tray Fig. 9.
5.Attach the water pump hose, from the saw, to the water pump with the hose adapter (R) Fig. 1, as shown in Fig. 9.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
10
