SHUTTING DOWN
1.After each use, if you have siphoned chemicals, siphon a bucket of clean water through the chemical hose. NOTE: Failure to do so will cause damage to the pump.
2.Place the
3.Turn water source off.
4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.
5.See Storage section in this manual for proper storage procedures.
MAINTENANCE
When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause
serious injury or death!
Before performing any maintenance or repair, unplug unit from power source, let motor cool and release all water pressure.
To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as
Any maintenance or repair not listed should be performed by an Authorized Warranty Service Center.
CUSTOMER RESPONSIBILITIES TABLE
|
| Before | Every 25 | Every 50 | Every 100 | |
|
| hours or | hours or | hours or | ||
| MAINTENANCE TASK | each use | ||||
| yearly | yearly | yearly | |||
|
|
|
| |||
| PRESSURE WASHER |
|
|
|
|
|
| check high pressure hose for | X |
|
|
| |
| leaks |
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
| check soap and chemical | X |
|
|
| |
| hose and filter |
|
|
| ||
|
|
|
|
|
| |
| check gun and wand for leaks | X |
|
|
| |
| prepare for storage | Prepare unit for storage if it is to remain idle for longer | ||||
|
| than 30 days |
|
|
| |
|
|
|
|
|
|
|
| HIGH PRESSURE PUMP |
|
|
|
|
|
|
|
|
|
|
|
|
| check/clean inlet screen | X |
|
|
|
|
|
|
|
|
|
|
|
| check/change oil | * |
|
|
|
|
|
|
|
|
|
|
|
* This pump does not require oil
MOTOR
Clean motor after each use. Using a cloth remove debris from motor. DO NOT use water to clean motor.
A17914 | 14- ENG |
