POWER SUPPLY

English

Batteries

For the set (optional)

Open the battery compartment of the set and insert 6 batteries, type R20, UM-1or D-cells (preferably alkaline).

For the remote control (AZ 1208, AZ 1210 only)

Open the battery compartment of the remote control and insert 2 batteries, type R03, UM-4or AAA-cells (preferably alkaline).

Remove batteries if they are flat or the set is not going to be used for a longer period of time.

Batteries contain chemical substances, so they should be disposed of properly.

Mains

1

Check whether the mains voltage as shown on the type plate

 

 

corresponds to your local mains voltage. If it does not, consult

 

 

your dealer or service organisation. The type plate is located

 

 

on the bottom side of the set.

 

2

If the set is equipped with a VOLTAGE selector X, set this

X

 

selector to the local mains voltage.

 

3Connect the mains cable to the AC MAINS inlet and the wall socket. This switches on the mains supply. The mains cable is inside the battery compartment.

The battery supply will be switched off when the set is connected to the mains. To change over to battery supply, pull out the plug from the unit’s AC MAINS socket.

To disconnect the set from the mains completely, remove the mains plug from the wall socket.

For users in the U.K.: please follow the instructions on page 2.

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

6