Porter-Cable AZ1203 Tuning to radio stations, Programming radio stations (29 preset stations), Tuning to preset stations

RADIO

English

Tuning to radio stations

1	Set the POWER slider to TUNER.
		STOP
2	Select the wave band by using the BAND selector.	PLAY
		PAUSE
	™ Display indication: the selected waveband.
3	Press SEARCH ° or § for approx. 1 second and then release
	the button.
	™ The radio automatically tunes to a station with sufficient
	strength. Display indication during automatic tuning: Srch.

PROG

SEARCH

BAND

SHUFF

PRESET

4 Repeat this procedure until you find a station you desire.

TUNERFM

To tune to a weak transmitter briefly press SEARCH ° or § as often as necessary for optimum reception, or until the correct frequency is indicated in the display.

Programming radio stations (29 preset stations)

You can store up to 29 radio stations in the memory. When tuning to a preset station, the preset number (1 to 29) is indicated in the display.

1Set the POWER slider to TUNER.

2Press PROGRAM to enter the programming mode.

™During programming, PROGRAM flashes on the display.

3Tune to a desired station with SEARCH ° or §, as described earlier (see ”Tuning to radio stations”).

™If the frequency is already stored in the memory, the preset number will be displayed.

4Press PRESET 4 or 3 to allocate a number from 1 to 29 to the preset station.

	PROG
SEARCH	REPEAT
	BAND
	SHUFFLE
	PR
	ESET

PROGRAM

TUNERFM

5Press PROGRAM to confirm the setting.

Tuning to preset stations

Press PRESET 4 or 3 until the desired preset number appears

on the display.

STEREO

TUNERFM

8