Playing a CD

1Set the POWER slider to CD.

2Press / OPEN to open the CD compartment.

3Insert an audio CD (printed side up) and close the CD compartment.

™The CD player starts and scans the contents list of the CD. Then, the CD player stops. Display indication: the total number of tracks and the total playing time of the CD.

4Press the PLAY·PAUSE 2; button to start CD play.

™Display indication: the current track number.

5Press the STOP 9 button to stop CD play.

™Display indication: the total number of tracks.

You can interrupt CD play by pressing PLAY·PAUSE 2;. Continue CD play by pressing the button again.

™Display indication: the time of the actual position flashes.

Note: CD play will also stop if:

–you open the CD compartment,

–the end of the CD is reached, or

–you move the POWER slider to TUNER or TAPE.

If you make a mistake when operating the CD player, or the

CD player cannot read the CD, the display shows Cd Err. (See chapter ”TROUBLESHOOTING”.)

If you press PLAY·PAUSE 2; and there is no CD inserted the display shows no dISC.

CD PLAYER

English

OPEN

CD

STOP

PLAY

PAUSE

SEARCH

CD

CD

CD

9