D29525
21- ENG
3. Faulty wire harness
1. Faulty rectifier
1. Have Service Center replace.
2. Faulty windings in stator 2. Have Service Center replace.
3. Have Service Center replace.
5. Faulty wire harness
4. Faulty circuit board
1. Faulty solenoid
1. Reduce load.
2. Move to adequate supply of fresh air.
1. Have Service Center replace.
2. Faulty idle control switch 2. Have Service Center replace.
3. Faulty windings in stator a3. Have Service Center replace.
4. Have Service Center replace.
5. Have Service Center replace.
1. Generator overloaded.
2. Insufficient ventilation.
1. Reduce load.
2. Check for damaged, bare, or frayed wires on equipment. Replace.
4. Faulty power cord.
5. GFCI switch breaker kicked out.
1. Overload
2. Faulty cords or
equipment
3. Have Service Center replace capacitor.
4. Repair or replace cord.
5. Depress and reset
2. Circuit breaker kicked out.
3. Defective capacitor.
1. Have Service Center replace.
2. Depress and reset.
7. Attach wire to spark plug.
1. Low on fuel or oil.
2. Ignition switch in "Off" position.
3. Faulty spark plug. 3. Replace spark plug.
4. Choke in wrong position. 4. Adjust choke accordingly.
5. Fuel shut-off valve in 5. Open fuel shut-off valve. closed position
6. Unit loaded during start- 6. Remove load from unit. up.
7. Spark plug wire loose.
1. Faulty receptacle.
1. Add fuel or oil.
2. Turn to "ON" position
CAUSE
CORRECTION
TROUBLESHOOTING GUIDE
PROBLEM
Engine will not start
No electrical output
Repeated circuit breaker tripping
Generator overheating
No auto idle
DC does not have power with the circuit breaker depressed
