TO SIPHON CHEMICALS/CLEANING SOLVENTS

Siphoning chemicals or cleaning solvents is a low pressure operation.

NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

1. Press chemical hose onto barbed fitting located

Barbed

near high pressure hose connection of pump as

Fitting

shown.

 

 

2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution.

3.Install low pressure (black) nozzle into quick connect fitting of wand, see How To Use Wand paragraph in this section.

4.After use of chemical, siphon clean water through chemical hose to rinse it and pump clean.

Chemicals which remain in pump can damage it. Damage to pump due to

chemicals will not be covered under warranty.

NOTE: Chemicals and soap will not siphon when wand is in the high pressure setting.

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Never fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

Never pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

Never turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions please call 1-888-559-8550 to speak to a service representative for further instructions.

11- ENG

D25805

Page 10 Page 12
Page 11
Image 11
Porter-Cable PCH3500C To Siphon CHEMICALS/CLEANING Solvents, Read and Understand ALL Warnings Before Starting Unit
Page 10 Page 12

PCH3500C, D25805-025-1 specifications

The Porter-Cable D25805-025-1 and PCH3500C are powerful tools designed to meet the demands of both professionals and DIY enthusiasts. With advanced features and reliable technology, these products are tailored for efficiency and effectiveness in various tasks.

The D25805-025-1 is a high-performance rotary hammer that stands out for its robust design and versatility. It delivers exceptional drilling capabilities with its hammer drill function, allowing users to tackle tough materials like concrete and masonry with ease. One of the main features includes its variable speed control, which enables precise operation, allowing users to match the speed to the specific material and task at hand. The ergonomic handle provides a comfortable grip, reducing user fatigue during prolonged use.

Another key feature of the D25805-025-1 is its integrated vibration control technology. This innovation minimizes vibrations, enhancing user comfort and maintaining accuracy while working. It is also equipped with an adjustable depth stop for consistent hole depth, an essential feature for professional applications. The durable construction ensures longevity, making it a reliable choice for heavy-duty tasks.

On the other hand, the PCH3500C is an equally impressive tool, revered for its advanced circular saw capabilities. It operates at high speeds, facilitating fast cuts through a variety of materials. The 3500 RPM motor ensures efficient performance, while the laser guide feature allows for precise cutting lines, enhancing accuracy and minimizing waste.

The PCH3500C also boasts an adjustable bevel capacity, providing users with flexibility to make angled cuts. The lightweight design combined with an easy-to-grip handle ensures that even extended use remains comfortable. Safety features, including a blade guard and electric brake, protect the user and contribute to a safer work environment.

Both tools embody Porter-Cable's commitment to quality and innovation, making them suitable for a range of applications from home improvement projects to professional construction tasks. With their user-friendly designs and powerful performance characteristics, the D25805-025-1 and PCH3500C are excellent additions to any tool collection. Whether drilling into tough surfaces or making precise cuts, these tools provide reliability and efficiency, fulfilling the diverse needs of their users while upholding industry standards.
Top Page Image Contents