STORAGE

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach

an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

ENGINE PREPARATION

1.Add fuel stabilizer to fuel tank to minimize the formation of fuel gum deposits during storage.

2.Run engine at least 10 minutes after adding stabilizer to allow it to enter the fuel system.

3.Next shut off engine.

4.Disconnect the spark plug wire and remove the spark plug.

5.Add one teaspoon of oil through the spark plug hole.

6.Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

7.Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

GENERATOR

•Clean the generator as outlined in the Maintenance Section on this manual.

•Check that cooling air slots and openings on generator are open and unobstructed.

15- ENG

D26729

Page 14 Page 16
Page 15
Image 15
Porter-Cable D26729-028-0 instruction manual Storage, Engine Preparation, Generator
Page 14 Page 16

D26729-028-0 specifications

The Porter-Cable D26729-028-0 is a powerful and versatile oscillating tool designed for professionals and DIY enthusiasts alike. Known for its robust functionality, the tool enhances precision and efficiency in various applications ranging from cutting to sanding. With a dedicated focus on user needs, the D26729 model embodies the blend of innovative technology and dependable craftsmanship that Porter-Cable is renowned for.

One of the standout features of the D26729-028-0 is its powerful motor. The 3.0-amp motor delivers consistent performance, making it suitable for demanding tasks while ensuring minimal downtime between projects. This ensures that users can tackle a variety of materials, including wood, metal, and plaster, with ease. The variable speed control allows for customization of the oscillation frequency, offering users the ability to adjust the tool’s performance based on the specific application and material, ensuring optimal results every time.

The tool’s design emphasizes ergonomics, featuring a user-friendly grip and lightweight build that minimizes fatigue during extended use. This thoughtful design enables greater control and comfort, allowing users to maintain focus and precision throughout their tasks. The quick-change accessory system is another significant characteristic of the D26729-028-0, enabling users to swiftly switch between accessories without the need for tools. This feature increases workflow efficiency and allows for easy transitions between different applications, such as sanding or cutting.

Durability is a key aspect of the Porter-Cable D26729-028-0, constructed with high-quality materials that can withstand the rigors of professional use. The device is also designed to reduce vibrations during operation, enhancing comfort and control. Its dust collection feature ensures a cleaner working environment by minimizing debris spread, further contributing to the tool’s overall user-centric design.

Additionally, the D26729 model is compatible with a wide array of accessories, making it a flexible addition to any toolbox. This compatibility extends the functionality of the tool, allowing it to serve multiple purposes in various projects, from home improvement to intricate woodworking tasks.

In summary, the Porter-Cable D26729-028-0 oscillating tool combines power, precision, and user-friendly features, making it an essential tool for both professionals and hobbyists. With its advanced technologies and robust design, it caters to a broad spectrum of applications, enhancing productivity while ensuring optimal results.
Top Page Image Contents