![](/images/new-backgrounds/1314669/31466919x1.webp)
If tool is used without an
SERVICE AND REPAIRS
All quality tools eventually require servicing or replacement of parts due to wear from normal use. Some user serviceable components are described in the TROUBLESHOOTING Section. Complete product Service is available from either an AUTHORIZED
Should you have any questions about your tool, feel free to write us at any time. In any communications, please give all information shown on the nameplate of your tool (model number, type, serial number, etc.).
TROUBLESHOOTING
CAUTION: Disconnect tool from air supply before performing any Service Procedure.
SYMPTOM | PROBLEMS | SOLUTIONS |
1.Air leak near top of tool or in trigger area.
Loose screws. | Tighten screws. |
Worn or damaged | Install “OVERHAUL” Maintenance Kit. |
|
2. Tool does nothing or | Inadequate air supply. | Verify adequate air supply. |
|
operates sluggishly. | Inadequate lubrication. | Put 5 or 6 drops of oil into air inlet. | |
|
| Worn or damaged | Install |
“DRIVER” Maintenance Kit.
3.Air leak near bottom of tool.
Loose screws. | Tighten screws. |
Worn or damaged | Install “OVERHAUL” Maintenance Kit. |
|
4. | Tool jams frequently. | Incorrect fasteners. | Verify approved fasteners of |
|
|
| correct size. |
|
| Damaged fasteners. | Replace w/undamaged fasteners. |
|
| Magazine or nose | Tighten screws. |
|
| screws loose. |
|
|
| Magazine is dirty. | Clean magazine. |
|
| Driver is worn or damaged. | Install “DRIVER” Maintenance Kit. |
|
|
|
|
5. | Other. |
| Contact a |
|
|
| Service Facility. |
9